V Spinner II 1650 (Batteries)
Vision Spinner II Battery Variable Voltage 1650mAh
This is one of the most powerful compact batteries on the market and it will last you for hours and hours and is the preferred battery choice if you are a heavy smoker or if you simply want to recharge as seldom as possible.
The battery has a dial located at the base of the battery and it has four markings to indicate output voltages at 3.3, 3.8, 4.3, and 4.8 volts but is adjustable throughout the entire voltage range for fine tuning. Simply turn the dial to your desired vaping voltage.
You can choose from many different colors and there are also matching color tanks to be bought.
The Spinner II battery has a safety function that allows you to turn on/off the battery. To place the battery in or out of locked mode, press the button rapidly 5 times (within 2 seconds). The button will flash 3 times in different colors indicating you have changed mode.
It also has an automatic Cut-Off Protection if button is held down for longer than 8 seconds. In case of a short circuit, which usually happens when the user connect the USB charger or a tank wrong, the Short-Circuit-Protection kicks in and the button ﬂashes three times and that battery temporarily stops working until the conditions causing short circuit is corrected.
If the button flashes in different colors (15 times) when you try to use it, it means that it needs to be recharged. You can easy keep track of how much power you have left.
• If the button displays a White color when the battery is on, that indicates a remaining 60%-100% in battery power
• If the battery displays a Blue color when battery is on, it indicates a remaining 30%-60% battery power left
• If the button displays an Orange color when the battery is on, that indicates a remaining 0%-30% in battery power ( that means its time to recharge your battery!)
As for charging time, Spinner II, for its large capacity of 1650mA, requires about 5-6 hours to be fully recharged if the the battery has no power at all. You can recharge the battery 500+ times.
NOTE: Spinner II, no different to regular EGO batteries, requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as iPhone chargers, is likely to damage the battery and cause unwanted consequences. Therefore the usage of non-standard chargers on Spinner II is strictly prohibited and immediately invalidates the warranty.
Batteries are an important part of your e-cig everyday and the worst thing is to run dry of power and don't have a backup ready. We recommend that you have at least 2 batteries in back up. The battery is recharged using a 510/EGO USB Charger (Please note: USB charger is not included with the battery and must be purchased separately from the accessories section) Note II: When you recharge your Spinner II battery, check it after 15 mins that is still is charging, it has a tendency to stop charging in the first 15 mins. Simply reconnect the battery and then it continue to fully recharged.
This is a genuine Vision Spinner II VV 1650 mAh with a tracking number (scratch code) for authentication.